Past Projects

Evers & Sons provided full field installation services for a 1 Bcf/d natural gas meter station interconnect in Louisiana.

Evers & Sons provided full field installation services for a 700 MMcfd meter station supporting an LNG export pipeline system in Texas.

Evers & Sons provided full field installation services for a greenfield natural gas H₂S treating facility with a design capacity of 400 MMcfd.

Evers & Sons provided full field installation services for a 290 MMSCFD greenfield compressor station supporting natural gas transportation infrastructure.

Evers & Sons provided full field installation services for a 600 MMSCFD greenfield compressor station.

Evers & Sons provided full field installation services for a greenfield natural gas TEG dehydration facility with a design capacity of 400 MMcfd.

Evers & Sons provided full field installation services for a 100 MMSCFD brownfield compressor station in Louisiana.

Evers & Sons provided full field installation services for the Gillis Treating Plant, a core component of Momentum Midstream’s NG3 Project— a 1.7 Bcf/d natural gas processing plant linking the Haynesville Shale to Gulf Coast LNG markets.

Evers & Sons was contracted to install twin greenfield water transfer pump stations simultaneously.

Evers & Sons Inc. was contracted to install a new greenfield transmission booster compressor station, constructed alongside a new substation as part of a two-phase expansion.

Evers & Sons Inc. partnered with the client to expand an existing brownfield treating facility with new equipment supporting the operation of three (3) sulfur recovery units (LO-CAT trains) and a shared chemical storage area.

After successfully completing the original greenfield treating facility, Evers & Sons Inc. partnered again with the client to execute an expansion project supporting the operation of two (2) sulfur recovery units (LO-CAT trains) and a common chemical storage area.

Evers & Sons Inc. was responsible for the civil, structural, and mechanical installation for this greenfield project designed to handle 1.6 BCFD.

This project involved the installation and field welding of all 2” through 36” process piping (class 150-900#), open and closed drain piping, and utility piping.

The project consisted of a greenfield natural gas treating facility, which included the installation of amine treating, H2S treating, gas dehydration, filtration equipment, gas compression, air compression, flare, inlet and outlet piping interconnects, and all associated piping installation/fabrication work. Structural steel installation was also included (prefabricated by others).

The renewable natural gas facility converts unutilized waste gas from the landfill into 6400 SCM of natural gas.

This project was designed to receive, separate, process, and distribute natural gas, crude oil, and produced water directly from well sites.

The CDP Terminal included four (4) 45,000-barrel storage tanks for the storage and blending of on-spec crude oil.

The project consisted of the construction of a SWD (Salt Water Disposal) facility designed to meet a maximum injection rate of up to 120,000 bbls/d at injection pressures up to 5,000 psi.

The project consisted of (10) Central Tank Batteries designed to receive, separate, and distribute natural gas, crude oil, and produced water directly from well sites.

This project was an NGL Loading Station designed to serve as the central sales terminal for natural gas liquids (NGLs) across a region encompassing over 440,000 acres of wells and 400 miles of gathering system.

Evers & Sons’ scope included the procurement and installation of all civil (dirt and cement), structural (racks, supports, clamps, walkways, and access platforms), equipment setting, and interconnecting piping.

This project involved the construction of a new greenfield compressor station with a total compression capacity of 200 MMSCFD, boosting pressure from 65 PSIG to 1,250 PSIG through (10) natural gas-driven CAT 3612 compressors.

Each system consisted of 100 MMSCFD capacity and included the following major components: